Re: Gear lever
Posted by Arthur Farrow on Apr 24, 2020; 9:20am
URL: http://silk-motorcycles.221.s1.nabble.com/Gear-lever-tp5001852p5001859.html
My bike is an early one (Frame 3) and has right hand change and an elegant and "pretty" alloy gear lever...I have seen some fabricated steel ones of varying quality and assume these are non original.
Clive W and I discussed the alloy ones a long while back and he thought getting castings would be good, mine has been bent, buggered, straightened, welded, flushed down the toilet and I suspect used as a toothpick.
I'
ll await more responses to see if its viable
URL: http://silk-motorcycles.221.s1.nabble.com/Gear-lever-tp5001852p5001859.html
My bike is an early one (Frame 3) and has right hand change and an elegant and "pretty" alloy gear lever...I have seen some fabricated steel ones of varying quality and assume these are non original.
Clive W and I discussed the alloy ones a long while back and he thought getting castings would be good, mine has been bent, buggered, straightened, welded, flushed down the toilet and I suspect used as a toothpick.
I'
ll await more responses to see if its viable
| Free forum by Nabble | Edit this page |