Re: Ignition system
Posted by
gasman on
Feb 11, 2015; 5:12pm
URL: http://silk-motorcycles.221.s1.nabble.com/Ignition-system-tp5001260p5001261.html
The original is luminition, if it has Pazon it is an after market addition. Can you photograph it and put online then we will be able to tell for sure.
If you can remove it epoxy will do as its only a compound to protect the connections.
Just not too much heat on the soldering.
It's only an l e d which the shutter breaks the beam. Any good electronics company should be able to supply something similar if all goes wrong.
Sent from my iPhone
On 11 Feb 2015, at 17:03, Peter [via Silk Motorcycles] <
[hidden email]> wrote:
Looking at the ignition system today --i but i do not know who made the system - i understood it to be pazon but i am told they have only been going around 5 years so i'm puzzled the wires have gone all brittle so i was hoping to replace the the wires only on dismantling i found the wires are soldered to a pickup make unknown covered with a hard setting compound which if i was to remove may be hard to replicate,
any thoughts on a solution to my problem
HELP !