Login  Register

Re: Replacing oil cable

Posted by Hendred on Jan 17, 2015; 1:17pm
URL: http://silk-motorcycles.221.s1.nabble.com/Replacing-oil-cable-tp5001200p5001204.html

I don't remember any special set up when I took my pump apart.  The central worm gear drives the gear which operates the cams of the pumps.  It is important to ensure the slot in the operating arm in the cover engages with the pin on the pump otherwise the throttle regulated oiling won't work - mine wasn't when I got the bike because the arm was bent.  The small O rings should be replaced as well.  Be interested to hear from more experienced owners if there is a specific set up for the pump.  Not very helpful response I'm afraid.

Jon