Login  Register

Re: bike won't rev out

Posted by gasman on Jan 03, 2015; 8:53pm
URL: http://silk-motorcycles.221.s1.nabble.com/bike-won-t-rev-out-tp5001188p5001191.html

What are the frame and eng numbers,
The ignition can be as far as 7.62m btdc, have u checked the bobweights to see if they are free and moving, 
Depends on crankcase compression and no air leaks, inlet manifold, check the two rear cylinder block Allan bolts are sealed as the hole does break through into the inlet track normally silicon cures this, have you got the correct air filter fitted,
What is the colour of the plugs when revving, r the piston rings free in the grooves, and where in the country r u, my email is [hidden email]
Have you spoken to Clive at all.
Kev 

Sent from my iPhone

On 3 Jan 2015, at 17:47, ukpco [via Silk Motorcycles] <[hidden email]> wrote:

Thanks for the welcome, I'm pretty sure the ignition is standard Lumenition.


If you reply to this email, your message will be added to the discussion below:
http://silk-motorcycles.6084.x6.nabble.com/bike-won-t-rev-out-tp5001188p5001190.html
To start a new topic under Silk Motorcycles, email [hidden email]
To unsubscribe from Silk Motorcycles, click here.
NAML