Re: SILK 700S MK2
Posted by gasman on
URL: http://silk-motorcycles.221.s1.nabble.com/SILK-700S-MK2-tp5000926p5000927.html
Eric, as far as I know there should be 4 holes, 2 high 2 low, feed and supply. The small pipe is to drain excess from the oil pump housing but I found on mine if the "o" rings are good I got very little in the housing so little I did not have the pipe fitted.
URL: http://silk-motorcycles.221.s1.nabble.com/SILK-700S-MK2-tp5000926p5000927.html
Eric, as far as I know there should be 4 holes, 2 high 2 low, feed and supply. The small pipe is to drain excess from the oil pump housing but I found on mine if the "o" rings are good I got very little in the housing so little I did not have the pipe fitted.
| Free forum by Nabble | Edit this page |